It is not a good idea anytime to turn on your computer for getting faced with an error screen that prohibits you from starting it, getting into a system that operates, or trying anything for this to happen. It generates a sense of worry and uncertainty since you can’t access anything, no matter how many times you reset your computer.
For many Windows 7,8 and 10 holders, this is what occurs when they gain the “restart and choose correct boot device” black screen problem text. It might occur out of nowhere owing to damaged system files, a broken or failing hard drive, or even if you have messed with the computer’s boot sequence.
Learn all the factors that lead to the issue, as well as some suggestions for how to resolve it. Do not miss the blog anywhere until the last hand with us to know the most needed information.
Why Does the “Reboot and Select Proper Boot Device” Error Occur?
The problem “restart and choose proper start device” simply indicates that your device’s basic system of input, output, or BIOS, is unable to show your operating system’s boot disc.
Restarting your computer, going into the UEFI BIOS system, and selecting the right boot device containing your operating system to boot from are the only options you have when this happens.
This error message might arise due to several factors, including hardware and software problems.
Boot disc difficulties might include a broken or failed boot disc, a bad connection, an unusable SATA slot, and even a dead hard drive that isn’t properly attached to your computer’s hardware.
Inactive boot partitions, damaged or corrupted master boot records (MBR), incorrect BIOS boot sequences, corrupted or lost boot data, or a corrupted operating system are examples of software problems.
Solutions to fix the reboot and how to select the reboot device error
Following are a few ways to fix this issue:
Solution 1: Start by checking your hard drive’s power cable.
A power cable is required to supply electricity to your operating system’s hard drive. If the power connection is damaged, frayed, or connected incorrectly, your computer may not be able to identify your hard disc.
- After you’ve shut down your computer, restart it.
- Look for the hard drive disc to the motherboard power cable and verify whether it is physically broken or not connected correctly.
- If it looks to be connected properly but the problem remains, remove it from your computer and try it on another.
- If the problem happens on the test computer, try a different power cord.
If the error doesn’t appear on the test computer, make sure your power cord is correctly attached before continuing with the rest of the procedure.
Solution 2: Clear your RAM.
If you haven’t removed or cleared your RAM since you acquired your computer in the beginning, this may be the root of the issue. Switch off your computer and get rid of the sideboard by removing screws beneath your laptop to clean the RAM. Remove the RAM clamps from their places gently when they have been freed. With a neat material, clean any dirt from the RAM and install it again. Close your computer and start it again to see if the issue still exists.
Solution 3: Check in BIOS to see whether a Boot Drive is detected.
- It’s possible that your computer’s BIOS doesn’t recognize your boot disc. Follow these steps to confirm this.
- When your computer restarts or boots, hit the specified key after the post-screen prompt appears to enter the BIOS.
- On the main screen, A list of all the devices recognized by your BIOS should appear. Fans, hard drives, and any other connected equipment, such as a DVD/CD drive, will all be included.
- Open your computer and either attach your hard drive to another SATA slot or connect your hard drive to a separate SATA slot on your motherboard with another SATA cable.
- Start your device again and make sure to see whether your hard drive is found. It’s a sure sign that either the cable or your motherboard’s SATA port was the culprit.
- If your hard drive is still not visible in the BIOS, the boot disc may be corrupted, failed, damaged, or dead.
Shut off your computer if your hard drive isn’t mentioned.
Solution 4: In the BIOS, see if the Boot Order is correct.
This “reboot and choose the correct boot device” issue might appear when something goes wrong during the boot procedure. You may check your BIOS boot sequence by starting your computer and pressing the post-screen key.
- The startup or boot tab or screen can be found once you have entered the BIOS. The boot order may be shown on the main screen in newer BIOS systems.
- If you still can’t find the boot sequence, you can look in the BIOS’s more complex settings.
- Your boot disc should be listed first in the list of boot devices.
- Then, if it’s not in the top spot, but it’s on the list, make the change. You may drag and drop the boot order on newer BIOS systems to change it. If you’re using an old BIOS, you might have to use your arrow keys.
- Reboot your computer after saving your modifications and putting the boot drive in the first place.
Solution 5: Go into BIOS and make all the settings default to their best possible state.
Even though it’s a long shot, it’s possible that not having your BIOS values set to the defaults causes instability. The “reboot and choose appropriate boot device error” might be caused by this instability. To do this, restart your computer, enter your BIOS, and then select “load optimal defaults.” Restart after loading the defaults.
Take away
When you go through the blog you can see a lot of information on fixing the reboot and selecting a proper boot device error and through this, you can also find a few ways to fix your issue.
Read More: Corsair Link Download for Windows 10
